Ryobi P816 Review

Ryobi P816

Ryobi P816 Ryobi
P816

18V Li-Ion Compact
Drill Driver
1/2" Chuck
Price Level: $$
Torque

350

Max In-Lbs
Speed

1600

Max RPM
Weight

3

Lbs w Batt
Battery

1.5

Ah Capacity
Warranty

3

Year

Ratings Guide   Best Better Good FairPoor



KEY STRENGTHS & WEAKNESSES
POWER The P816 is 26% less powerful than average and ranks in the bottom 40% of 18V-class drills for torque and power. It generates 118 in-lbs less maximum torque than the average 468 in-lbs drill in its class.  
SPEED This Ryobi cordless drill has about average speed with a max RPM comparable with standard 18V-class drills. The average cordless drill in this class runs at speeds up to 1584 RPM.  
WEIGHT It is 37% lighter than average and ranks in the top 20% of 18V-class drills for lower weight. It weighs 1.7 lbs less than the average 4.7 lb cordless drill in this class and should decrease operator fatigue.
BATTERY This Lithium Ion (Li-Ion) battery ranks about average for capacity and run-time with an amp-hour (Ah) rating that is considered standard for 18V-class batteries. The average battery capacity for this class is rated at 2.2 amp-hours.  
WARRANTY Ryobi's 3-year limited tool warranty is a little longer than average for the cordless drill industry where the standard is about 2-3 years. Longer warranties can often indicate improved durability with fewer repairs.


Ryobi P816 Cordless Drill


PERFORMANCE RATINGS
Power 350 in-lbs - The P816 is 26% less powerful than average and ranks in the bottom 40% of 18V-class drills for torque and power. It generates 118 in-lbs less maximum torque than the average 468 in-lbs drill in its class.  
Speed
Settings
2 Settings 0-440 / 0-1,600 RPM - Fitted with both Low and High speed settings that come standard on most cordless drills. Speed selection is an important feature to match drilling or driving RPM to each unique job.
Max
Speed
1600 RPM - This Ryobi cordless drill has about average speed with a max RPM comparable with standard 18V-class drills. The average cordless drill in this class runs at speeds up to 1584 RPM.  
Clutch 24 Settings - The Ryobi P816 has an above average number of clutch settings that provide a wide range of protection for almost any job. The clutch acts like a brake and helps prevent stripping screws.
Power
Ratio
117 P/W - The Ryobi P816 has an 17% higher than average power-to-weight ratio and ranks in the top 40% of efficiently designed 18V-class drills. The P/W ratio is 17 higher than the 100 average ratio for this class drill.
Hammer This cordless drill is not equipped with a hammer function that can deliver several thousand impacts per minute. Hammer drill drivers are usually a little heavier and costlier, but they are effective on tougher jobs such as drilling into concrete.  


DURABILITY RATINGS
Gear
Case
Non-Metal Parts - Some of the Ryobi P816 transmission components are made of non-metal materials that are more susceptible to failure. Gears spin at high RPMs and experience large rotational forces.  
Chuck Plastic Sleeve - Chuck sleeves made of tough plastic materials save on weight, but they are more prone to cracking than metal sleeves. It generally won't withstand repeated drops onto hard surfaces.  
Motor No Brush Access - The entire drill usually has to be taken apart in order to access the motor brushes. Motor brushes wear-out and must be replaced periodically, but repair costs can sometimes be prohibitive.  
Warranty 3-Year - Ryobi's 3-year limited tool warranty is a little longer than average for the cordless drill industry where the standard is about 2-3 years. Longer warranties can often indicate improved durability with fewer repairs.


BATTERY RATINGS
Type Lithium Ion (Li-Ion) P103 - Newer technology rechargeable battery that provides higher capacity and longer run-time with less weight, but are more expensive than the older NiCd and NiMH batteries.
Capacity 1.5 Ah - This Lithium Ion (Li-Ion) battery ranks about average for capacity and run-time with an amp-hour (Ah) rating that is considered standard for 18V-class batteries. The average battery capacity for this class is rated at 2.2 amp-hours.  
Charge
Time
60 min P116 Charger - Battery charge-time is about average for this class battery. If you only have one battery, or you go through multiple batteries on the job-site, charge-time is an important consideration.  
Fuel
Gauge
No Battery Fuel Gauge - Not equipped with a battery charge indicator that alerts you to remaining battery life or if the batteries are running low. Sudden battery failure during the job is a common frustration.  
Backup 2 Batteries Included - It's important to have a second back-up battery for the Ryobi P816 that's charged and ready to go. Makes it easy to swap-out batteries during the job with minimal down-time.


CONVENIENCE RATINGS
Weight 3 lbs Tool Plus Battery - It is 37% lighter than average and ranks in the top 20% of 18V-class drills for lower weight. It weighs 1.7 lbs less than the average 4.7 lb cordless drill in this class and should decrease operator fatigue.
Length Cordless drill length is a personal preference, but shorter is generally better to help you in close quarters such as under a sink, or drilling in-between studs. Torque is harder to handle if the drill is too short though.  
Spindle
Lock
One-Hand Bit Change - This single-sleeve chuck has auto spindle lock. The drill bit can be changed with only one hand by simply spinning the chuck open to release the bit, and counter-spinning it to tighten.
LED
Light
Integrated LED Light - The Ryobi P816 illuminates your work area and allows you to clearly see your bit position and depth while you're drilling or driving. Great feature that's now available on many cordless drills.
Belt
Hook
No Belt Hook - There is no provision to hang the drill on your belt and free-up both hands to perform other tasks. You may be able to purchase a separate belt clip that can be attached to the drill.  
Side
Handle
No Side Handle - Side handles are a great safety feature and should be considered if you plan to drive at higher torque levels. They can help prevent injury by providing increased stability and control.  
Bubble
Level
Integrated Bubble Level - Helps you to visually keep the drill level while drilling holes or driving screws. This feature is helpful for precision work alignment and is only available on a few cordless drills.
Keyless Keyless Chuck - Nearly all cordless drills are now equipped with keyless chucks that can be tightened with both hands (double-sleeve) or just one hand (single-sleeve) without the use of a key.
VSR VSR - Most cordless drills are equipped with variable speed capability that can be controlled with simple trigger pressure. Reverse is usually performed with the push of a side-to-side button.


Go to Cordless Drill Reviews from Ryobi P816 Review
Go to Ryobi Cordless Drill from Ryobi P816 Review





Disclosure | Disclaimer | Privacy
Copyright © 2009-2013 Cordless-Drill-Reviews.com. All Rights Reserved.