Porter-Cable PC180DK-2 Review

Porter-Cable PC180DK-2

Porter-Cable PC180DK-2 Porter-Cable
PC180DK-2

18V 1/2" NiCd
Drill Driver
1/2" Chuck
Price Level: $$
Torque

440

Max In-Lbs
Speed

1400

Max RPM
Weight

5.1

Lbs w Batt
Battery

1.5

Ah Capacity
Warranty

3

Year

Ratings Guide   Best Better Good FairPoor



KEY STRENGTHS & WEAKNESSES
POWER The PC180DK-2 generates about average power and torque when compared to other 18V-class cordless drills. The average cordless drill in this class can generate up to 468 in-lbs of maximum torque.  
SPEED This Porter-Cable cordless drill is 12% slower than average and ranks in the bottom 40% of 18V-class drills for maximum RPM. It can only run at top speeds that are 184 RPM less than the average 1584 RPM drill in its class.  
WEIGHT It weighs about average and would be considered standard weight when compared to other 18V-class drills. The average cordless drill in this voltage class weighs about 4.7 lbs.  
BATTERY This Nickel Cadmium (NiCd) battery ranks about average for capacity and run-time with an amp-hour (Ah) rating that is considered standard for 18V-class batteries. The average battery capacity for this class is rated at 2.2 amp-hours.  
WARRANTY Porter-Cable's 3-year limited tool warranty is a little longer than average for the cordless drill industry where the standard is about 2-3 years. Longer warranties can often indicate improved durability with fewer repairs.


Porter-Cable PC180DK-2 Cordless Drill


PERFORMANCE RATINGS
Power 440 in-lbs - The PC180DK-2 generates about average power and torque when compared to other 18V-class cordless drills. The average cordless drill in this class can generate up to 468 in-lbs of maximum torque.  
Speed
Settings
2 Settings 0-350 / 0-1,400 RPM - Fitted with both Low and High speed settings that come standard on most cordless drills. Speed selection is an important feature to match drilling or driving RPM to each unique job.
Max
Speed
1400 RPM - This Porter-Cable cordless drill is 12% slower than average and ranks in the bottom 40% of 18V-class drills for maximum RPM. It can only run at top speeds that are 184 RPM less than the average 1584 RPM drill in its class.  
Clutch 32 Settings - The Porter-Cable PC180DK-2 has an above average number of clutch settings that provide a wide range of protection for almost any job. The clutch acts like a brake and helps prevent stripping screws.
Power
Ratio
86 P/W - The Porter-Cable PC180DK-2 is designed with an average power-to-weight ratio that is standard for mid-range 18V-class cordless drills. The average P/W ratio is about 100 for cordless drills in this voltage class.  
Hammer This cordless drill is not equipped with a hammer function that can deliver several thousand impacts per minute. Hammer drill drivers are usually a little heavier and costlier, but they are effective on tougher jobs such as drilling into concrete.  


DURABILITY RATINGS
Gear
Case
Non-Metal Parts - Some of the Porter-Cable PC180DK-2 transmission components are made of non-metal materials that are more susceptible to failure. Gears spin at high RPMs and experience large rotational forces.  
Chuck All-Metal - Drills are commonly dropped-off ladders onto concrete and the chuck often bears the brunt of the impact. An all-metal chuck with metal sleeve helps prevent damage and costly repairs.
Motor No Brush Access - The entire drill usually has to be taken apart in order to access the motor brushes. Motor brushes wear-out and must be replaced periodically, but repair costs can sometimes be prohibitive.  
Warranty 3-Year - Porter-Cable's 3-year limited tool warranty is a little longer than average for the cordless drill industry where the standard is about 2-3 years. Longer warranties can often indicate improved durability with fewer repairs.


BATTERY RATINGS
Type Nickel Cadmium (NiCd) PC18B - The oldest and original cordless drill battery that is still found on many drills, but is significantly larger and heavier than the newer high-capacity Lithium-Ion batteries.  
Capacity 1.5 Ah - This Nickel Cadmium (NiCd) battery ranks about average for capacity and run-time with an amp-hour (Ah) rating that is considered standard for 18V-class batteries. The average battery capacity for this class is rated at 2.2 amp-hours.  
Charge
Time
60 min PCMVC Charger - Battery charge-time is about average for this class battery. If you only have one battery, or you go through multiple batteries on the job-site, charge-time is an important consideration.  
Fuel
Gauge
No Battery Fuel Gauge - Not equipped with a battery charge indicator that alerts you to remaining battery life or if the batteries are running low. Sudden battery failure during the job is a common frustration.  
Backup 2 Batteries Included - It's important to have a second back-up battery for the Porter-Cable PC180DK-2 that's charged and ready to go. Makes it easy to swap-out batteries during the job with minimal down-time.


CONVENIENCE RATINGS
Weight 5.1 lbs Tool Plus Battery - It weighs about average and would be considered standard weight when compared to other 18V-class drills. The average cordless drill in this voltage class weighs about 4.7 lbs.  
Length 9 in - Cordless drill length is a personal preference, but shorter is generally better to help you in close quarters such as under a sink, or drilling in-between studs. Torque is harder to handle if the drill is too short though.  
Spindle
Lock
One-Hand Bit Change - This single-sleeve chuck has auto spindle lock. The drill bit can be changed with only one hand by simply spinning the chuck open to release the bit, and counter-spinning it to tighten.
LED
Light
Integrated LED Light - The Porter-Cable PC180DK-2 illuminates your work area and allows you to clearly see your bit position and depth while you're drilling or driving. Great feature that's now available on many cordless drills.
Belt
Hook
No Belt Hook - There is no provision to hang the drill on your belt and free-up both hands to perform other tasks. You may be able to purchase a separate belt clip that can be attached to the drill.  
Side
Handle
Side Handle Included - Higher torque levels can cause injury if a bit suddenly binds or the drill slips. A side handle is essential to handle more powerful drills and provides additional stability and control.
Bubble
Level
No Bubble Level - This feature is only available on a few drills and can be helpful in situations where precision holes are critical for alignment. Most projects can be performed with just visual sighting.  
Keyless Keyless Chuck - Nearly all cordless drills are now equipped with keyless chucks that can be tightened with both hands (double-sleeve) or just one hand (single-sleeve) without the use of a key.
VSR VSR - Most cordless drills are equipped with variable speed capability that can be controlled with simple trigger pressure. Reverse is usually performed with the push of a side-to-side button.


Go to Cordless Drill Reviews from Porter-Cable PC180DK-2 Review
Go to Porter-Cable Cordless Drill from Porter-Cable PC180DK-2 Review





Disclosure | Disclaimer | Privacy
Copyright © 2009-2013 Cordless-Drill-Reviews.com. All Rights Reserved.