Porter-Cable PC180CHDK-2 Review

Porter-Cable PC180CHDK-2

Porter-Cable PC180CHDK-2 Porter-Cable
PC180CHDK-2

18V Compact NiCd
Hammer Drill Driver
1/2" Chuck
Price Level: $$
Torque

424

Max In-Lbs
Speed

1500

Max RPM
Weight

5

Lbs w Batt
Battery

1.5

Ah Capacity
Warranty

3

Year

Ratings Guide   Best Better Good FairPoor



KEY STRENGTHS & WEAKNESSES
POWER The PC180CHDK-2 generates about average power and torque when compared to other 18V-class cordless drills. The average cordless drill in this class can generate up to 468 in-lbs of maximum torque.  
SPEED This Porter-Cable cordless drill has about average speed with a max RPM comparable with standard 18V-class drills. The average cordless drill in this class runs at speeds up to 1584 RPM.  
WEIGHT It weighs about average and would be considered standard weight when compared to other 18V-class drills. The average cordless drill in this voltage class weighs about 4.7 lbs.  
BATTERY This Nickel Cadmium (NiCd) battery ranks about average for capacity and run-time with an amp-hour (Ah) rating that is considered standard for 18V-class batteries. The average battery capacity for this class is rated at 2.2 amp-hours.  
WARRANTY Porter-Cable's 3-year limited tool warranty is a little longer than average for the cordless drill industry where the standard is about 2-3 years. Longer warranties can often indicate improved durability with fewer repairs.


Porter-Cable PC180CHDK-2 Cordless Drill


PERFORMANCE RATINGS
Power 424 in-lbs - The PC180CHDK-2 generates about average power and torque when compared to other 18V-class cordless drills. The average cordless drill in this class can generate up to 468 in-lbs of maximum torque.  
Speed
Settings
2 Settings 0-350 / 0-1,500 RPM - Fitted with both Low and High speed settings that come standard on most cordless drills. Speed selection is an important feature to match drilling or driving RPM to each unique job.
Max
Speed
1500 RPM - This Porter-Cable cordless drill has about average speed with a max RPM comparable with standard 18V-class drills. The average cordless drill in this class runs at speeds up to 1584 RPM.  
Clutch 22 Settings - The Porter-Cable PC180CHDK-2 has an above average number of clutch settings that provide a wide range of protection for almost any job. The clutch acts like a brake and helps prevent stripping screws.
Power
Ratio
85 P/W - The Porter-Cable PC180CHDK-2 is designed with an average power-to-weight ratio that is standard for mid-range 18V-class cordless drills. The average P/W ratio is about 100 for cordless drills in this voltage class.  
Hammer 0-25,500 IPM - Generates a hammer impact rate that's 6% lower than average and ranks in the bottom 40% of hammer drills for IPM. It delivers 1500 less impacts per minute (IPM) than the average 27000 IPM drill.  


DURABILITY RATINGS
Gear
Case
Non-Metal Parts - Some of the Porter-Cable PC180CHDK-2 transmission components are made of non-metal materials that are more susceptible to failure. Gears spin at high RPMs and experience large rotational forces.  
Chuck All-Metal - Drills are commonly dropped-off ladders onto concrete and the chuck often bears the brunt of the impact. An all-metal chuck with metal sleeve helps prevent damage and costly repairs.
Motor No Brush Access - The entire drill usually has to be taken apart in order to access the motor brushes. Motor brushes wear-out and must be replaced periodically, but repair costs can sometimes be prohibitive.  
Warranty 3-Year - Porter-Cable's 3-year limited tool warranty is a little longer than average for the cordless drill industry where the standard is about 2-3 years. Longer warranties can often indicate improved durability with fewer repairs.


BATTERY RATINGS
Type Nickel Cadmium (NiCd) PC18B - The oldest and original cordless drill battery that is still found on many drills, but is significantly larger and heavier than the newer high-capacity Lithium-Ion batteries.  
Capacity 1.5 Ah - This Nickel Cadmium (NiCd) battery ranks about average for capacity and run-time with an amp-hour (Ah) rating that is considered standard for 18V-class batteries. The average battery capacity for this class is rated at 2.2 amp-hours.  
Charge
Time
60 min PCMVC Charger - Battery charge-time is about average for this class battery. If you only have one battery, or you go through multiple batteries on the job-site, charge-time is an important consideration.  
Fuel
Gauge
No Battery Fuel Gauge - Not equipped with a battery charge indicator that alerts you to remaining battery life or if the batteries are running low. Sudden battery failure during the job is a common frustration.  
Backup 2 Batteries Included - It's important to have a second back-up battery for the Porter-Cable PC180CHDK-2 that's charged and ready to go. Makes it easy to swap-out batteries during the job with minimal down-time.


CONVENIENCE RATINGS
Weight 5 lbs Tool Plus Battery - It weighs about average and would be considered standard weight when compared to other 18V-class drills. The average cordless drill in this voltage class weighs about 4.7 lbs.  
Length 9 in - Cordless drill length is a personal preference, but shorter is generally better to help you in close quarters such as under a sink, or drilling in-between studs. Torque is harder to handle if the drill is too short though.  
Spindle
Lock
One-Hand Bit Change - This single-sleeve chuck has auto spindle lock. The drill bit can be changed with only one hand by simply spinning the chuck open to release the bit, and counter-spinning it to tighten.
LED
Light
Integrated LED Light - The Porter-Cable PC180CHDK-2 illuminates your work area and allows you to clearly see your bit position and depth while you're drilling or driving. Great feature that's now available on many cordless drills.
Belt
Hook
No Belt Hook - There is no provision to hang the drill on your belt and free-up both hands to perform other tasks. You may be able to purchase a separate belt clip that can be attached to the drill.  
Side
Handle
No Side Handle - Side handles are a great safety feature and should be considered if you plan to drive at higher torque levels. They can help prevent injury by providing increased stability and control.  
Bubble
Level
No Bubble Level - This feature is only available on a few drills and can be helpful in situations where precision holes are critical for alignment. Most projects can be performed with just visual sighting.  
Keyless Keyless Chuck - Nearly all cordless drills are now equipped with keyless chucks that can be tightened with both hands (double-sleeve) or just one hand (single-sleeve) without the use of a key.
VSR VSR - Most cordless drills are equipped with variable speed capability that can be controlled with simple trigger pressure. Reverse is usually performed with the push of a side-to-side button.


Go to Cordless Drill Reviews from Porter-Cable PC180CHDK-2 Review
Go to Porter-Cable Cordless Drill from Porter-Cable PC180CHDK-2 Review





Disclosure | Disclaimer | Privacy
Copyright © 2009-2013 Cordless-Drill-Reviews.com. All Rights Reserved.