Milwaukee 2602-22CT Review

Milwaukee 2602-22CT

Milwaukee 2602-22CT Milwaukee
2602-22CT

M18 Li-Ion 1/2"
Hammer Drill Driver
1/2" Chuck
Price Level: $$$$
Torque

450

Max In-Lbs
Speed

1700

Max RPM
Weight

4.4

Lbs w Batt
Battery

1.5

Ah Capacity
Warranty

5

Year

Ratings Guide   Best Better Good FairPoor



KEY STRENGTHS & WEAKNESSES
POWER The 2602-22CT generates about average power and torque when compared to other 18V-class cordless drills. The average cordless drill in this class can generate up to 468 in-lbs of maximum torque.  
SPEED This Milwaukee cordless drill is 8% faster than average and ranks in the top 40% of 18V-class drills for maximum RPM. It can run at speeds that achieve 116 RPM more than the average 1584 RPM drill in its class.
WEIGHT It is 7% lighter than average and ranks in the top 40% of 18V-class drills for lower weight. It weighs 0.3 lbs less than the average 4.7 lb cordless drill in this class and should decrease operator fatigue.
BATTERY This Lithium Ion (Li-Ion) battery ranks about average for capacity and run-time with an amp-hour (Ah) rating that is considered standard for 18V-class batteries. The average battery capacity for this class is rated at 2.2 amp-hours.  
WARRANTY Milwaukee's 5-year limited tool warranty is significantly longer than most cordless drill manufacturers and ranks in the top 30% of cordless drills. Longer warranties can often indicate improved durability with fewer repairs.


Milwaukee 2602-22CT Cordless Drill


PERFORMANCE RATINGS
Power 450 in-lbs - The 2602-22CT generates about average power and torque when compared to other 18V-class cordless drills. The average cordless drill in this class can generate up to 468 in-lbs of maximum torque.  
Speed
Settings
2 Settings 550 / 1,700 RPM - Fitted with both Low and High speed settings that come standard on most cordless drills. Speed selection is an important feature to match drilling or driving RPM to each unique job.
Max
Speed
1700 RPM - This Milwaukee cordless drill is 8% faster than average and ranks in the top 40% of 18V-class drills for maximum RPM. It can run at speeds that achieve 116 RPM more than the average 1584 RPM drill in its class.
Clutch 24 Settings - The Milwaukee 2602-22CT has an above average number of clutch settings that provide a wide range of protection for almost any job. The clutch acts like a brake and helps prevent stripping screws.
Power
Ratio
102 P/W - The Milwaukee 2602-22CT is designed with an average power-to-weight ratio that is standard for mid-range 18V-class cordless drills. The average P/W ratio is about 100 for cordless drills in this voltage class.  
Hammer 0-29,000 IPM - Equipped with a 8% faster than average hammer impact rate and ranks in the top 40% of hammer drills for IPM. It delivers 2000 more impacts per minute (IPM) than the average 27000 IPM drill.


DURABILITY RATINGS
Gear
Case
All-Metal - The Milwaukee 2602-22CT transmission has all-metal gears that provide superior durability compared to nylon gears found in many drills. Gears spin at high RPMs and are susceptible to material break-down.
Chuck All-Metal - Drills are commonly dropped-off ladders onto concrete and the chuck often bears the brunt of the impact. An all-metal chuck with metal sleeve helps prevent damage and costly repairs.
Motor No Brush Access - The entire drill usually has to be taken apart in order to access the motor brushes. Motor brushes wear-out and must be replaced periodically, but repair costs can sometimes be prohibitive.  
Warranty 5-Year - Milwaukee's 5-year limited tool warranty is significantly longer than most cordless drill manufacturers and ranks in the top 30% of cordless drills. Longer warranties can often indicate improved durability with fewer repairs.


BATTERY RATINGS
Type Lithium Ion (Li-Ion) Redlithium 48-11-1815 - Newer technology rechargeable battery that provides higher capacity and longer run-time with less weight, but are more expensive than the older NiCd and NiMH batteries.
Capacity 1.5 Ah - This Lithium Ion (Li-Ion) battery ranks about average for capacity and run-time with an amp-hour (Ah) rating that is considered standard for 18V-class batteries. The average battery capacity for this class is rated at 2.2 amp-hours.  
Charge
Time
30 min 48-59-1801 Charger - Battery charge-time is quicker than average. Nice feature for those times when you don't have a charged replacement battery ready to go and you're in the middle of a job.
Fuel
Gauge
Battery Fuel Gauge - Equipped with an on-board battery charge indicator that keeps you aware of the remaining battery life. Great feature that prevents frustration - no more dead battery surprises.
Backup 2 Batteries Included - It's important to have a second back-up battery for the Milwaukee 2602-22CT that's charged and ready to go. Makes it easy to swap-out batteries during the job with minimal down-time.


CONVENIENCE RATINGS
Weight 4.4 lbs Tool Plus Battery - It is 7% lighter than average and ranks in the top 40% of 18V-class drills for lower weight. It weighs 0.3 lbs less than the average 4.7 lb cordless drill in this class and should decrease operator fatigue.
Length 8-1/2 in - Cordless drill length is a personal preference, but shorter is generally better to help you in close quarters such as under a sink, or drilling in-between studs. Torque is harder to handle if the drill is too short though.  
Spindle
Lock
One-Hand Bit Change - This single-sleeve chuck has auto spindle lock. The drill bit can be changed with only one hand by simply spinning the chuck open to release the bit, and counter-spinning it to tighten.
LED
Light
Integrated LED Light - The Milwaukee 2602-22CT illuminates your work area and allows you to clearly see your bit position and depth while you're drilling or driving. Great feature that's now available on many cordless drills.
Belt
Hook
No Belt Hook - There is no provision to hang the drill on your belt and free-up both hands to perform other tasks. You may be able to purchase a separate belt clip that can be attached to the drill.  
Side
Handle
No Side Handle - Side handles are a great safety feature and should be considered if you plan to drive at higher torque levels. They can help prevent injury by providing increased stability and control.  
Bubble
Level
No Bubble Level - This feature is only available on a few drills and can be helpful in situations where precision holes are critical for alignment. Most projects can be performed with just visual sighting.  
Keyless Keyless Chuck - Nearly all cordless drills are now equipped with keyless chucks that can be tightened with both hands (double-sleeve) or just one hand (single-sleeve) without the use of a key.
VSR VSR - Most cordless drills are equipped with variable speed capability that can be controlled with simple trigger pressure. Reverse is usually performed with the push of a side-to-side button.


Go to Cordless Drill Reviews from Milwaukee 2602-22CT Review
Go to Milwaukee Cordless Drill from Milwaukee 2602-22CT Review





Disclosure | Disclaimer | Privacy
Copyright © 2009-2013 Cordless-Drill-Reviews.com. All Rights Reserved.