Milwaukee 2411-22 Review

Milwaukee 2411-22

Milwaukee 2411-22 Milwaukee
2411-22

12V M12 Li-Ion 3/8"
Hammer Drill Driver
3/8" Chuck
Price Level: $$
Torque

275

Max In-Lbs
Speed

1500

Max RPM
Weight

2.8

Lbs w Batt
Battery

1.4

Ah Capacity
Warranty

5

Year

Ratings Guide   Best Better Good FairPoor



KEY STRENGTHS & WEAKNESSES
POWER The 2411-22 is 16% more powerful than average and ranks in the top 40% of 12V-class drills for torque and power. It generates 36 in-lbs more maximum torque than the average 239 in-lbs drill in its class.
SPEED This Milwaukee cordless drill is 20% faster than average and ranks in the top 20% of 12V-class drills for maximum RPM. It can run at speeds that achieve 247 RPM more than the average 1253 RPM drill in its class.
WEIGHT It is 18% lighter than average and ranks in the top 40% of 12V-class drills for lower weight. It weighs 0.6 lbs less than the average 3.4 lb cordless drill in this class and should decrease operator fatigue.
BATTERY This Lithium Ion (Li-Ion) battery ranks about average for capacity and run-time with an amp-hour (Ah) rating that is considered standard for 12V-class batteries. The average battery capacity for this class is rated at 1.3 Ah.  
WARRANTY Milwaukee's 5-year limited tool warranty is significantly longer than most cordless drill manufacturers and ranks in the top 30% of cordless drills. Longer warranties can often indicate improved durability with fewer repairs.


Milwaukee 2411-22 Cordless Drill


PERFORMANCE RATINGS
Power 275 in-lbs - The 2411-22 is 16% more powerful than average and ranks in the top 40% of 12V-class drills for torque and power. It generates 36 in-lbs more maximum torque than the average 239 in-lbs drill in its class.
Speed
Settings
2 Settings 0-400 / 0-1,500 RPM - Fitted with both Low and High speed settings that come standard on most cordless drills. Speed selection is an important feature to match drilling or driving RPM to each unique job.
Max
Speed
1500 RPM - This Milwaukee cordless drill is 20% faster than average and ranks in the top 20% of 12V-class drills for maximum RPM. It can run at speeds that achieve 247 RPM more than the average 1253 RPM drill in its class.
Clutch 18 Settings - The Milwaukee 2411-22 has a below average number of clutch settings, but is probably still adequate for many DIY jobs. The clutch helps you to avoid stripping a screw with too much torque.  
Power
Ratio
98 P/W - The Milwaukee 2411-22 has an 33% higher than average power-to-weight ratio and ranks in the top 40% of efficiently designed 12V-class drills. The P/W ratio is 24 higher than the 74 average ratio for this class drill.
Hammer 0-22,500 IPM - Generates a hammer impact rate that's 17% lower than average and ranks in the bottom 20% of hammer drills for IPM. It delivers 4500 less impacts per minute (IPM) than the average 27000 IPM drill.  


DURABILITY RATINGS
Gear
Case
All-Metal - The Milwaukee 2411-22 transmission has all-metal gears that provide superior durability compared to nylon gears found in many drills. Gears spin at high RPMs and are susceptible to material break-down.
Chuck All-Metal - Drills are commonly dropped-off ladders onto concrete and the chuck often bears the brunt of the impact. An all-metal chuck with metal sleeve helps prevent damage and costly repairs.
Motor No Brush Access - The entire drill usually has to be taken apart in order to access the motor brushes. Motor brushes wear-out and must be replaced periodically, but repair costs can sometimes be prohibitive.  
Warranty 5-Year - Milwaukee's 5-year limited tool warranty is significantly longer than most cordless drill manufacturers and ranks in the top 30% of cordless drills. Longer warranties can often indicate improved durability with fewer repairs.


BATTERY RATINGS
Type Lithium Ion (Li-Ion) Redlithium 48-11-2401 - Newer technology rechargeable battery that provides higher capacity and longer run-time with less weight, but are more expensive than the older NiCd and NiMH batteries.
Capacity 1.4 Ah - This Lithium Ion (Li-Ion) battery ranks about average for capacity and run-time with an amp-hour (Ah) rating that is considered standard for 12V-class batteries. The average battery capacity for this class is rated at 1.3 Ah.  
Charge
Time
30 min Milwaukee Charger - Battery charge-time is quicker than average. Nice feature for those times when you don't have a charged replacement battery ready to go and you're in the middle of a job.
Fuel
Gauge
Battery Fuel Gauge - Equipped with an on-board battery charge indicator that keeps you aware of the remaining battery life. Great feature that prevents frustration - no more dead battery surprises.
Backup 2 Batteries Included - It's important to have a second back-up battery for the Milwaukee 2411-22 that's charged and ready to go. Makes it easy to swap-out batteries during the job with minimal down-time.


CONVENIENCE RATINGS
Weight 2.8 lbs Tool Plus Battery - It is 18% lighter than average and ranks in the top 40% of 12V-class drills for lower weight. It weighs 0.6 lbs less than the average 3.4 lb cordless drill in this class and should decrease operator fatigue.
Length 7-5/8 in - Cordless drill length is a personal preference, but shorter is generally better to help you in close quarters such as under a sink, or drilling in-between studs. Torque is harder to handle if the drill is too short though.  
Spindle
Lock
One-Hand Bit Change - This single-sleeve chuck has auto spindle lock. The drill bit can be changed with only one hand by simply spinning the chuck open to release the bit, and counter-spinning it to tighten.
LED
Light
Integrated LED Light - The Milwaukee 2411-22 illuminates your work area and allows you to clearly see your bit position and depth while you're drilling or driving. Great feature that's now available on many cordless drills.
Belt
Hook
No Belt Hook - There is no provision to hang the drill on your belt and free-up both hands to perform other tasks. You may be able to purchase a separate belt clip that can be attached to the drill.  
Side
Handle
No Side Handle - Side handles are a great safety feature and should be considered if you plan to drive at higher torque levels. They can help prevent injury by providing increased stability and control.  
Bubble
Level
No Bubble Level - This feature is only available on a few drills and can be helpful in situations where precision holes are critical for alignment. Most projects can be performed with just visual sighting.  
Keyless Keyless Chuck - Nearly all cordless drills are now equipped with keyless chucks that can be tightened with both hands (double-sleeve) or just one hand (single-sleeve) without the use of a key.
VSR VSR - Most cordless drills are equipped with variable speed capability that can be controlled with simple trigger pressure. Reverse is usually performed with the push of a side-to-side button.


Go to Cordless Drill Reviews from Milwaukee 2411-22 Review
Go to Milwaukee Cordless Drill from Milwaukee 2411-22 Review





Disclosure | Disclaimer | Privacy
Copyright © 2009-2013 Cordless-Drill-Reviews.com. All Rights Reserved.