Makita DP4002 Review

Makita DP4002

Makita DP4002 Makita
DP4002

1/2" Keyed VSR
Power Drill
1/2" Keyed Chuck
Price Level: $$
Power

7

Amps
Speed

600

Max RPM
Weight

4.9

Pounds
Capacity

1.5

In. Wood Bit
Warranty

1

Year

Ratings Guide   Best Better Good FairPoor



KEY STRENGTHS & WEAKNESSES
POWER The DP4002 generates about average power when compared to other corded power drills. The average power drill motor carries an electrical current load of about 7.2 amps.  
SPEED This Makita drill is 45% slower than average and ranks in the bottom 40% of power drills for maximum RPM. It can only run at top speeds that are 490 RPM less than the average 1090 RPM corded drill.  
WEIGHT It is 7% heavier than average and ranks in the bottom 40% of power drills for higher weight. It weighs 0.3 lbs more than the average 4.6 lb corded drill and may increase operator fatigue.  
CAPACITY This power drill has a higher than average wood bit capacity and ranks in the top class of corded drills. It can drill a hole in wood that is larger than the average 1-1/4" hole capacity for corded drills.
WARRANTY Makita's 1-year limited tool warranty is shorter than the drill industry standard but is typical for many manufacturers. Shorter warranties can sometimes be an indicator of lower quality and reliability.  


Makita DP4002 Cordless Drill


PERFORMANCE RATINGS
Power 7 amps - The DP4002 generates about average power when compared to other corded power drills. The average power drill motor carries an electrical current load of about 7.2 amps.  
Capacity
Wood
1.5" Hole - This power drill has a higher than average wood bit capacity and ranks in the top class of corded drills. It can drill a hole in wood that is larger than the average 1-1/4" hole capacity for corded drills.
Speed 0-600 RPM - This Makita drill is 45% slower than average and ranks in the bottom 40% of power drills for maximum RPM. It can only run at top speeds that are 490 RPM less than the average 1090 RPM corded drill.  
Capacity
Steel
0.5" Hole - This power drill has a higher than average bit capacity for steel and ranks in the top 40% of corded drills. It can drill a hole in steel that is 1/8" larger than the average 3/8" hole capacity for corded drills.
Power
Ratio
1.4 P/W - The Makita DP4002 power-to-weight ratio is 13% lower than average and ranks in the bottom 40% of corded drills. The P/W ratio is 0.2 lower than the 1.6 average ratio for power drills.  
Gear
Reduction
Double - Gear systems with double reduction generally provide more torque for a given amperage. They operate more efficiently at lower speeds than single gear systems, which extends the life of the drill.


DURABILITY RATINGS
Gear
Housing
All-Metal - The Makita DP4002 is manufactured with an all-metal gear housing that protects the transmission and prevents the drill from cracking when dropped onto hard surfaces such as concrete.
Gears Non-Metal Parts - Some of the transmission components are made of non-metal materials that are more susceptible to failure. Gears spin at high RPMs and experience large rotational forces.  
Warranty 1-Year - Makita's 1-year limited tool warranty is shorter than the drill industry standard but is typical for many manufacturers. Shorter warranties can sometimes be an indicator of lower quality and reliability.  


CONVENIENCE RATINGS
Weight 4.9 lbs - It is 7% heavier than average and ranks in the bottom 40% of power drills for higher weight. It weighs 0.3 lbs more than the average 4.6 lb corded drill and may increase operator fatigue.  
Length 12 in - Power drill length is a personal preference, but shorter is generally better to help you in close quarters such as under a sink, or drilling in-between studs. Torque is harder to handle if the drill is too short though.  
Spindle
Lock
No Spindle Lock - This power drill has a keyed chuck with superior gripping ability. Spindle lock is only applicable to keyless chucks and allows the operator to change drill bits with just one hand.  
Belt
Hook
Integrated Belt Hook - Includes a belt hook or clip that allows you to temporarily hang the drill from your belt or a ladder while you're performing other job tasks. Helps prevent dropped and damaged drills.
Side
Handle
Side Handle Included - Higher torque levels can cause injury if a bit suddenly binds or the drill slips. A side handle is essential to handle more powerful drills and provides additional stability and control.
VSR VSR - Most cordless drills are equipped with variable speed capability that can be controlled with simple trigger pressure. Reverse is usually performed with the push of a side-to-side button.


Go to Cordless Drill Reviews from Makita DP4002 Review
Go to Power Drill Reviews from Makita DP4002 Review





Disclosure | Disclaimer | Privacy
Copyright © 2009-2013 Cordless-Drill-Reviews.com. All Rights Reserved.