Makita 6337DWDE Review

Makita 6337DWDE

Makita 6337DWDE Makita
6337DWDE

14.4V NiMH
Drill Driver
1/2" Chuck
Discontinued
Torque

350

Max In-Lbs
Speed

1300

Max RPM
Weight

4.6

Lbs w Batt
Battery

2.6

Ah Capacity
Warranty

1

Year

Ratings Guide   Best Better Good FairPoor



KEY STRENGTHS & WEAKNESSES
POWER The 6337DWDE generates about average power and torque when compared to other 14.4V-class cordless drills. The average cordless drill in this class can generate up to 352 in-lbs of maximum torque.  
SPEED This Makita cordless drill is 11% slower than average and ranks in the bottom 40% of 14.4V-class drills for maximum RPM. It can only run at top speeds that are 159 RPM less than the average 1459 RPM drill in its class.  
WEIGHT It weighs about average and would be considered standard weight when compared to other 14.4V-class drills. The average cordless drill in this voltage class weighs about 4.6 lbs.  
BATTERY This Nickel-Metal Hydride (NiMH) battery has a 24% higher than average run-time with an amp hour (Ah) rating that ranks in the top 20% of 14.4V-class drills. It has 0.5 Ah more capacity than the average 2.1 Ah battery in this class.
WARRANTY Makita's 1-year limited tool warranty is shorter than the cordless drill industry standard but is typical for many manufacturers. Shorter warranties can sometimes be an indicator of lower quality and reliability.  


Makita 6337DWDE Cordless Drill


PERFORMANCE RATINGS
Power 350 in-lbs - The 6337DWDE generates about average power and torque when compared to other 14.4V-class cordless drills. The average cordless drill in this class can generate up to 352 in-lbs of maximum torque.  
Speed
Settings
2 Settings 0-400 / 0-1,300 RPM - Fitted with both Low and High speed settings that come standard on most cordless drills. Speed selection is an important feature to match drilling or driving RPM to each unique job.
Max
Speed
1300 RPM - This Makita cordless drill is 11% slower than average and ranks in the bottom 40% of 14.4V-class drills for maximum RPM. It can only run at top speeds that are 159 RPM less than the average 1459 RPM drill in its class.  
Clutch 20 Settings - The Makita 6337DWDE has an above average number of clutch settings that provide a wide range of protection for almost any job. The clutch acts like a brake and helps prevent stripping screws.
Power
Ratio
76 P/W - The Makita 6337DWDE is designed with an average power-to-weight ratio that is standard for mid-range 14.4V-class cordless drills. The average P/W ratio is about 77 for cordless drills in this voltage class.  
Hammer This cordless drill is not equipped with a hammer function that can deliver several thousand impacts per minute. Hammer drill drivers are usually a little heavier and costlier, but they are effective on tougher jobs such as drilling into concrete.  


DURABILITY RATINGS
Gear
Case
All-Metal - The Makita 6337DWDE transmission has all-metal gears that provide superior durability compared to nylon gears found in many drills. Gears spin at high RPMs and are susceptible to material break-down.
Chuck Plastic Sleeve - Chuck sleeves made of tough plastic materials save on weight, but they are more prone to cracking than metal sleeves. It generally won't withstand repeated drops onto hard surfaces.  
Motor External Access Brushes - Motor brushes must be replaced periodically and external access makes the job a much easier DIY task. No need to take your drill into the repair shop for complete disassembly.
Warranty 1-Year - Makita's 1-year limited tool warranty is shorter than the cordless drill industry standard but is typical for many manufacturers. Shorter warranties can sometimes be an indicator of lower quality and reliability.  


BATTERY RATINGS
Type Nickel-Metal Hydride (NiMH) Battery - Older rechargeable technology with higher capacity than NiCd batteries, but shorter shelf life. Inferior to Lithium Ion due to heavier weight and shorter run-times.  
Capacity 2.6 Ah - This Nickel-Metal Hydride (NiMH) battery has a 24% higher than average run-time with an amp hour (Ah) rating that ranks in the top 20% of 14.4V-class drills. It has 0.5 Ah more capacity than the average 2.1 Ah battery in this class.
Charge
Time
60 min DC1413 Charger - Battery charge-time is about average for this class battery. If you only have one battery, or you go through multiple batteries on the job-site, charge-time is an important consideration.  
Fuel
Gauge
No Battery Fuel Gauge - Not equipped with a battery charge indicator that alerts you to remaining battery life or if the batteries are running low. Sudden battery failure during the job is a common frustration.  
Backup 2 Batteries Included - It's important to have a second back-up battery for the Makita 6337DWDE that's charged and ready to go. Makes it easy to swap-out batteries during the job with minimal down-time.


CONVENIENCE RATINGS
Weight 4.6 lbs Tool Plus Battery - It weighs about average and would be considered standard weight when compared to other 14.4V-class drills. The average cordless drill in this voltage class weighs about 4.6 lbs.  
Length 9-9/16 in - Cordless drill length is a personal preference, but shorter is generally better to help you in close quarters such as under a sink, or drilling in-between studs. Torque is harder to handle if the drill is too short though.  
Spindle
Lock
One-Hand Bit Change - This single-sleeve chuck has auto spindle lock. The drill bit can be changed with only one hand by simply spinning the chuck open to release the bit, and counter-spinning it to tighten.
LED
Light
No LED Light - The Makita 6337DWDE does not have an integrated LED light that Illuminates your work area. This feature is extremely useful, but is obviously not essential if you have secondary lighting available.  
Belt
Hook
No Belt Hook - There is no provision to hang the drill on your belt and free-up both hands to perform other tasks. You may be able to purchase a separate belt clip that can be attached to the drill.  
Side
Handle
No Side Handle - Side handles are a great safety feature and should be considered if you plan to drive at higher torque levels. They can help prevent injury by providing increased stability and control.  
Bubble
Level
No Bubble Level - This feature is only available on a few drills and can be helpful in situations where precision holes are critical for alignment. Most projects can be performed with just visual sighting.  
Keyless Keyless Chuck - Nearly all cordless drills are now equipped with keyless chucks that can be tightened with both hands (double-sleeve) or just one hand (single-sleeve) without the use of a key.
VSR VSR - Most cordless drills are equipped with variable speed capability that can be controlled with simple trigger pressure. Reverse is usually performed with the push of a side-to-side button.


Go to Cordless Drill Reviews from Makita 6337DWDE Review
Go to Makita Cordless Drill from Makita 6337DWDE Review





Disclosure | Disclaimer | Privacy
Copyright © 2009-2013 Cordless-Drill-Reviews.com. All Rights Reserved.