Hitachi DS18DBL Review

Hitachi DS18DBL

Hitachi DS18DBL Hitachi
DS18DBL

18V Li-Ion Brushless
Drill Driver
1/2" Chuck
Price Level: $$$
Torque

593

Max In-Lbs
Speed

1800

Max RPM
Weight

4.4

Lbs w Batt
Battery

3

Ah Capacity
Warranty

Life

Year

Ratings Guide   Best Better Good FairPoor



KEY STRENGTHS & WEAKNESSES
POWER The DS18DBL is 27% more powerful than average and ranks in the top 20% of 18V-class drills for torque and power. It generates 125 in-lbs more maximum torque than the average 468 in-lbs drill in its class.
SPEED This Hitachi cordless drill is 14% faster than average and ranks in the top 20% of 18V-class drills for maximum RPM. It can run at speeds that achieve 216 RPM more than the average 1584 RPM drill in its class.
WEIGHT It is 7% lighter than average and ranks in the top 40% of 18V-class drills for lower weight. It weighs 0.3 lbs less than the average 4.7 lb cordless drill in this class and should decrease operator fatigue.
BATTERY This Lithium Ion (Li-Ion) battery has a 37% higher than average run-time with an amp hour (Ah) rating that ranks in the top 20% of 18V-class drills. It has 0.8 Ah more capacity than the average 2.2 Ah battery in this class.
WARRANTY Hitachi's lifetime limited tool warranty is significantly longer than most cordless drill manufacturers and ranks in the top 30% of cordless drills. Longer warranties can often indicate improved durability with fewer repairs.


Hitachi DS18DBL Cordless Drill


PERFORMANCE RATINGS
Power 593 in-lbs - The DS18DBL is 27% more powerful than average and ranks in the top 20% of 18V-class drills for torque and power. It generates 125 in-lbs more maximum torque than the average 468 in-lbs drill in its class.
Speed
Settings
8 Settings 0-400 (Low) / 0-1,800 (High) RPM - Above average number of no-load speed settings that provides greater versatility in matching the correct speed range to the task. The standard for most drills is a 2-speed High and Low.
Max
Speed
1800 RPM - This Hitachi cordless drill is 14% faster than average and ranks in the top 20% of 18V-class drills for maximum RPM. It can run at speeds that achieve 216 RPM more than the average 1584 RPM drill in its class.
Clutch 22 Settings - The Hitachi DS18DBL has an above average number of clutch settings that provide a wide range of protection for almost any job. The clutch acts like a brake and helps prevent stripping screws.
Power
Ratio
135 P/W - The Hitachi DS18DBL has an 35% higher than average power-to-weight ratio and ranks in the top 20% of efficiently designed 18V-class drills. The P/W ratio is 35 higher than the 100 average ratio for this class drill.
Hammer This cordless drill is not equipped with a hammer function that can deliver several thousand impacts per minute. Hammer drill drivers are usually a little heavier and costlier, but they are effective on tougher jobs such as drilling into concrete.  


DURABILITY RATINGS
Gear
Case
Non-Metal Parts - Some of the Hitachi DS18DBL transmission components are made of non-metal materials that are more susceptible to failure. Gears spin at high RPMs and experience large rotational forces.  
Chuck All-Metal - Drills are commonly dropped-off ladders onto concrete and the chuck often bears the brunt of the impact. An all-metal chuck with metal sleeve helps prevent damage and costly repairs.
Motor Brushless - Brushless motor technology provides more efficient running with lower friction and generally lasts longer than brushed motors. Never have to worry about replacing the brushes.
Warranty Lifetime - Hitachi's lifetime limited tool warranty is significantly longer than most cordless drill manufacturers and ranks in the top 30% of cordless drills. Longer warranties can often indicate improved durability with fewer repairs.


BATTERY RATINGS
Type Lithium Ion (Li-Ion) 330067 - Newer technology rechargeable battery that provides higher capacity and longer run-time with less weight, but are more expensive than the older NiCd and NiMH batteries.
Capacity 3 Ah - This Lithium Ion (Li-Ion) battery has a 37% higher than average run-time with an amp hour (Ah) rating that ranks in the top 20% of 18V-class drills. It has 0.8 Ah more capacity than the average 2.2 Ah battery in this class.
Charge
Time
45 min Hitachi Charger - Battery charge-time is quicker than average. Nice feature for those times when you don't have a charged replacement battery ready to go and you're in the middle of a job.
Fuel
Gauge
No Battery Fuel Gauge - Not equipped with a battery charge indicator that alerts you to remaining battery life or if the batteries are running low. Sudden battery failure during the job is a common frustration.  
Backup 2 Batteries Included - It's important to have a second back-up battery for the Hitachi DS18DBL that's charged and ready to go. Makes it easy to swap-out batteries during the job with minimal down-time.


CONVENIENCE RATINGS
Weight 4.4 lbs Tool Plus Battery - It is 7% lighter than average and ranks in the top 40% of 18V-class drills for lower weight. It weighs 0.3 lbs less than the average 4.7 lb cordless drill in this class and should decrease operator fatigue.
Length 8.1 in - Cordless drill length is a personal preference, but shorter is generally better to help you in close quarters such as under a sink, or drilling in-between studs. Torque is harder to handle if the drill is too short though.  
Spindle
Lock
One-Hand Bit Change - This single-sleeve chuck has auto spindle lock. The drill bit can be changed with only one hand by simply spinning the chuck open to release the bit, and counter-spinning it to tighten.
LED
Light
No LED Light - The Hitachi DS18DBL does not have an integrated LED light that Illuminates your work area. This feature is extremely useful, but is obviously not essential if you have secondary lighting available.  
Belt
Hook
Integrated Belt Hook - Includes a belt hook or clip that allows you to temporarily hang the drill from your belt or a ladder while you're performing other job tasks. Helps prevent dropped and damaged drills.
Side
Handle
Side Handle Included - Higher torque levels can cause injury if a bit suddenly binds or the drill slips. A side handle is essential to handle more powerful drills and provides additional stability and control.
Bubble
Level
No Bubble Level - This feature is only available on a few drills and can be helpful in situations where precision holes are critical for alignment. Most projects can be performed with just visual sighting.  
Keyless Keyless Chuck - Nearly all cordless drills are now equipped with keyless chucks that can be tightened with both hands (double-sleeve) or just one hand (single-sleeve) without the use of a key.
VSR VSR - Most cordless drills are equipped with variable speed capability that can be controlled with simple trigger pressure. Reverse is usually performed with the push of a side-to-side button.


Go to Cordless Drill Reviews from Hitachi DS18DBL Review
Go to Hitachi Cordless Drill from Hitachi DS18DBL Review





Disclosure | Disclaimer | Privacy
Copyright © 2009-2013 Cordless-Drill-Reviews.com. All Rights Reserved.