Hitachi D10VF Review

Hitachi D10VF

Hitachi D10VF Hitachi
D10VF

3/8" 9-Amp Keyed
Power Drill
3/8" Keyed Chuck
Price Level: $
Power

9

Amps
Speed

3000

Max RPM
Weight

4

Pounds
Capacity

1

In. Wood Bit
Warranty

5

Year

Ratings Guide   Best Better Good FairPoor



KEY STRENGTHS & WEAKNESSES
POWER The D10VF is 25% more powerful than average and ranks in the top 20% of power drills for amperage. The motor carries 1.8 amps more electrical current load than the average 7.2 amp corded drill.
SPEED This Hitachi drill is 176% faster than average and ranks in the top 20% of power drills for maximum RPM. It can run at speeds that achieve 1910 RPM more than the average 1090 RPM corded drill.
WEIGHT It is 14% lighter than average and ranks in the top 20% of power drills for lower weight. It weighs 0.6 lbs less than the average 4.6 lb corded drill and should decrease operator fatigue.
CAPACITY This power drill ranks about average for wood bit capacity with a hole diameter that is considered standard for corded drills. The average wood bit capacity for corded drills is about 1" to 1-1/4".  
WARRANTY Hitachi's 5-year limited tool warranty is significantly longer than most drill manufacturers and ranks in the top 30% of drills. Longer warranties can often indicate improved durability with fewer repairs.


Hitachi D10VF Cordless Drill


PERFORMANCE RATINGS
Power 9 amps - The D10VF is 25% more powerful than average and ranks in the top 20% of power drills for amperage. The motor carries 1.8 amps more electrical current load than the average 7.2 amp corded drill.
Capacity
Wood
1" Hole - This power drill ranks about average for wood bit capacity with a hole diameter that is considered standard for corded drills. The average wood bit capacity for corded drills is about 1" to 1-1/4".  
Speed 0-3000 RPM - This Hitachi drill is 176% faster than average and ranks in the top 20% of power drills for maximum RPM. It can run at speeds that achieve 1910 RPM more than the average 1090 RPM corded drill.
Capacity
Steel
0.375" Hole - This power drill ranks about average for bit capacity in steel with a hole diameter that is considered standard for corded drills. The average bit capacity in steel for corded drills is 3/8".  
Power
Ratio
2.3 P/W - The Hitachi D10VF has an 44% higher than average power-to-weight ratio and ranks in the top 20% of efficiently designed power drills. The P/W ratio is 0.7 higher than the 1.6 average ratio for corded drills.
Gear
Reduction
Single - Gear systems without double or triple reduction generally provide less torque for a given amperage. They operate less efficiently at lower speeds and the gears receive more stress and wear.  


DURABILITY RATINGS
Gear
Housing
All-Metal - The Hitachi D10VF is manufactured with an all-metal gear housing that protects the transmission and prevents the drill from cracking when dropped onto hard surfaces such as concrete.
Gears Non-Metal Parts - Some of the transmission components are made of non-metal materials that are more susceptible to failure. Gears spin at high RPMs and experience large rotational forces.  
Warranty 5-Year - Hitachi's 5-year limited tool warranty is significantly longer than most drill manufacturers and ranks in the top 30% of drills. Longer warranties can often indicate improved durability with fewer repairs.


CONVENIENCE RATINGS
Weight 4 lbs - It is 14% lighter than average and ranks in the top 20% of power drills for lower weight. It weighs 0.6 lbs less than the average 4.6 lb corded drill and should decrease operator fatigue.
Length Cordless drill length is a personal preference, but shorter is generally better to help you in close quarters such as under a sink, or drilling in-between studs. Torque is harder to handle if the drill is too short though.  
Spindle
Lock
No Spindle Lock - This power drill has a keyed chuck with superior gripping ability. Spindle lock is only applicable to keyless chucks and allows the operator to change drill bits with just one hand.  
Belt
Hook
Integrated Belt Hook - Includes a belt hook or clip that allows you to temporarily hang the drill from your belt or a ladder while you're performing other job tasks. Helps prevent dropped and damaged drills.
Side
Handle
No Side Handle - Side handles are a great safety feature and should be considered if you plan to drive at higher torque levels. They can help prevent injury by providing increased stability and control.  
VSR VSR - Most cordless drills are equipped with variable speed capability that can be controlled with simple trigger pressure. Reverse is usually performed with the push of a side-to-side button.


Go to Cordless Drill Reviews from Hitachi D10VF Review
Go to Power Drill Reviews from Hitachi D10VF Review





Disclosure | Disclaimer | Privacy
Copyright © 2009-2013 Cordless-Drill-Reviews.com. All Rights Reserved.