DeWalt DC750KA Review

DeWalt DC750KA

DeWalt DC750KA DeWalt
DC750KA

9.6V Compact
Compact Drill Driver
3/8" Chuck
Price Level: $$
Power

130

Max UWO
Speed

1100

Max RPM
Weight

3.4

Lbs w Batt
Battery

1.7

Ah Capacity
Warranty

3

Year

Ratings Guide   Best Better Good FairPoor



KEY STRENGTHS & WEAKNESSES
POWER The DC750KA generates about average power and torque when compared to other Compact-class cordless drills. The average cordless drill in this class can generate up to 183 UWO.  
SPEED This DeWalt cordless drill has about average speed with a max RPM comparable with standard Compact-class drills. The average cordless drill in this class runs at speeds up to 1085 RPM.  
WEIGHT It is 36% heavier than average and ranks in the bottom 20% of Compact-class drills for higher weight. It weighs 0.9 lbs more than the average 2.5 lb cordless drill in this class and may increase operator fatigue.  
BATTERY This Nickel Cadmium (NiCd) battery has a 36% higher than average run-time with an amp hour (Ah) rating that ranks in the top 20% of Compact-class drills. It has 0.5 Ah more capacity than the average 1.25 Ah battery in this class.
WARRANTY DeWalt's 3-year limited tool warranty is a little longer than average for the cordless drill industry where the standard is about 2-3 years. Longer warranties can often indicate improved durability with fewer repairs.


DeWalt DC750KA Cordless Drill


PERFORMANCE RATINGS
Power 130 UWO - The DC750KA generates about average power and torque when compared to other Compact-class cordless drills. The average cordless drill in this class can generate up to 183 UWO.  
Speed
Settings
2 Settings 0-300 / 0-1100 RPM - Fitted with both Low and High speed settings that come standard on most cordless drills. Speed selection is an important feature to match drilling or driving RPM to each unique job.
Max
Speed
1100 RPM - This DeWalt cordless drill has about average speed with a max RPM comparable with standard Compact-class drills. The average cordless drill in this class runs at speeds up to 1085 RPM.  
Clutch 15 Settings - The DeWalt DC750KA has a below average number of clutch settings, but is probably still adequate for many DIY jobs. The clutch helps you to avoid stripping a screw with too much torque.  
Power
Ratio
38 P/W - The DeWalt DC750KA power-to-weight ratio is 55% lower than average and ranks in the bottom 40% of Compact-class drills. The P/W ratio is 46 lower than the 84 average ratio for this class drill.  
Hammer This cordless drill is not equipped with a hammer function that can deliver several thousand impacts per minute. Hammer drill drivers are usually a little heavier and costlier, but they are effective on tougher jobs such as drilling into concrete.  


DURABILITY RATINGS
Gear
Case
Non-Metal Parts - Some of the DeWalt DC750KA transmission components are made of non-metal materials that are more susceptible to failure. Gears spin at high RPMs and experience large rotational forces.  
Chuck Plastic Sleeve - Chuck sleeves made of tough plastic materials save on weight, but they are more prone to cracking than metal sleeves. It generally won't withstand repeated drops onto hard surfaces.  
Motor No Brush Access - The entire drill usually has to be taken apart in order to access the motor brushes. Motor brushes wear-out and must be replaced periodically, but repair costs can sometimes be prohibitive.  
Warranty 3-Year - DeWalt's 3-year limited tool warranty is a little longer than average for the cordless drill industry where the standard is about 2-3 years. Longer warranties can often indicate improved durability with fewer repairs.


BATTERY RATINGS
Type Nickel Cadmium (NiCd) DW9061 - The oldest and original cordless drill battery that is still found on many drills, but is significantly larger and heavier than the newer high-capacity Lithium-Ion batteries.  
Capacity 1.7 Ah - This Nickel Cadmium (NiCd) battery has a 36% higher than average run-time with an amp hour (Ah) rating that ranks in the top 20% of Compact-class drills. It has 0.5 Ah more capacity than the average 1.25 Ah battery in this class.
Charge
Time
30 min DeWalt Charger - Battery charge-time is quicker than average. Nice feature for those times when you don't have a charged replacement battery ready to go and you're in the middle of a job.
Fuel
Gauge
No Battery Fuel Gauge - Not equipped with a battery charge indicator that alerts you to remaining battery life or if the batteries are running low. Sudden battery failure during the job is a common frustration.  
Backup 2 Batteries Included - It's important to have a second back-up battery for the DeWalt DC750KA that's charged and ready to go. Makes it easy to swap-out batteries during the job with minimal down-time.


CONVENIENCE RATINGS
Weight 3.4 lbs Tool Plus Battery - It is 36% heavier than average and ranks in the bottom 20% of Compact-class drills for higher weight. It weighs 0.9 lbs more than the average 2.5 lb cordless drill in this class and may increase operator fatigue.  
Length Cordless drill length is a personal preference, but shorter is generally better to help you in close quarters such as under a sink, or drilling in-between studs. Torque is harder to handle if the drill is too short though.  
Spindle
Lock
One-Hand Bit Change - This single-sleeve chuck has auto spindle lock. The drill bit can be changed with only one hand by simply spinning the chuck open to release the bit, and counter-spinning it to tighten.
LED
Light
No LED Light - The DeWalt DC750KA does not have an integrated LED light that Illuminates your work area. This feature is extremely useful, but is obviously not essential if you have secondary lighting available.  
Belt
Hook
No Belt Hook - There is no provision to hang the drill on your belt and free-up both hands to perform other tasks. You may be able to purchase a separate belt clip that can be attached to the drill.  
Side
Handle
No Side Handle - Side handles are a great safety feature and should be considered if you plan to drive at higher torque levels. They can help prevent injury by providing increased stability and control.  
Bubble
Level
No Bubble Level - This feature is only available on a few drills and can be helpful in situations where precision holes are critical for alignment. Most projects can be performed with just visual sighting.  
Keyless Keyless Chuck - Nearly all cordless drills are now equipped with keyless chucks that can be tightened with both hands (double-sleeve) or just one hand (single-sleeve) without the use of a key.
VSR VSR - Most cordless drills are equipped with variable speed capability that can be controlled with simple trigger pressure. Reverse is usually performed with the push of a side-to-side button.


Go to Cordless Drill Reviews from DeWalt DC750KA Review
Go to DeWalt Cordless Drill from DeWalt DC750KA Review





Disclosure | Disclaimer | Privacy
Copyright © 2009-2013 Cordless-Drill-Reviews.com. All Rights Reserved.