DeWalt DC725KA Review

DeWalt DC725KA

DeWalt DC725KA DeWalt
DC725KA

18V Compact
Hammer Drill Driver
1/2" Chuck
Price Level: $$$
Power

410

Max UWO
Speed

1700

Max RPM
Weight

4.9

Lbs w Batt
Battery

2.4

Ah Capacity
Warranty

3

Year

Ratings Guide   Best Better Good FairPoor



KEY STRENGTHS & WEAKNESSES
POWER The DC725KA generates about average power and torque when compared to other 18V-class cordless drills. The average cordless drill in this class can generate up to 468 UWO.  
SPEED This DeWalt cordless drill is 8% faster than average and ranks in the top 40% of 18V-class drills for maximum RPM. It can run at speeds that achieve 116 RPM more than the average 1584 RPM drill in its class.
WEIGHT It weighs about average and would be considered standard weight when compared to other 18V-class drills. The average cordless drill in this voltage class weighs about 4.7 lbs.  
BATTERY This Nickel Cadmium (NiCd) battery has a 10% higher than average run-time with an amp hour (Ah) rating that ranks in the top 40% of 18V-class drills. It has 0.2 Ah more capacity than the average 2.2 Ah battery in this class.
WARRANTY DeWalt's 3-year limited tool warranty is a little longer than average for the cordless drill industry where the standard is about 2-3 years. Longer warranties can often indicate improved durability with fewer repairs.


DeWalt DC725KA Cordless Drill


PERFORMANCE RATINGS
Power 410 UWO - The DC725KA generates about average power and torque when compared to other 18V-class cordless drills. The average cordless drill in this class can generate up to 468 UWO.  
Speed
Settings
2 Settings 0-500 / 0-1,700 RPM - Fitted with both Low and High speed settings that come standard on most cordless drills. Speed selection is an important feature to match drilling or driving RPM to each unique job.
Max
Speed
1700 RPM - This DeWalt cordless drill is 8% faster than average and ranks in the top 40% of 18V-class drills for maximum RPM. It can run at speeds that achieve 116 RPM more than the average 1584 RPM drill in its class.
Clutch 17 Settings - The DeWalt DC725KA has a below average number of clutch settings, but is probably still adequate for many DIY jobs. The clutch helps you to avoid stripping a screw with too much torque.  
Power
Ratio
84 P/W - The DeWalt DC725KA is designed with an average power-to-weight ratio that is standard for mid-range 18V-class cordless drills. The average P/W ratio is about 100 for cordless drills in this voltage class.  
Hammer 0-8,500 / 0-29,000 IPM - Equipped with a 8% faster than average hammer impact rate and ranks in the top 40% of hammer drills for IPM. It delivers 2000 more impacts per minute (IPM) than the average 27000 IPM drill in its class.


DURABILITY RATINGS
Gear
Case
Non-Metal Parts - Some of the DeWalt DC725KA transmission components are made of non-metal materials that are more susceptible to failure. Gears spin at high RPMs and experience large rotational forces.  
Chuck All-Metal - Drills are commonly dropped-off ladders onto concrete and the chuck often bears the brunt of the impact. An all-metal chuck with metal sleeve helps prevent damage and costly repairs.
Motor No Brush Access - The entire drill usually has to be taken apart in order to access the motor brushes. Motor brushes wear-out and must be replaced periodically, but repair costs can sometimes be prohibitive.  
Warranty 3-Year - DeWalt's 3-year limited tool warranty is a little longer than average for the cordless drill industry where the standard is about 2-3 years. Longer warranties can often indicate improved durability with fewer repairs.


BATTERY RATINGS
Type Nickel Cadmium (NiCd) DC 9096 XRP - The oldest and original cordless drill battery that is still found on many drills, but is significantly larger and heavier than the newer high-capacity Lithium-Ion batteries.  
Capacity 2.4 Ah - This Nickel Cadmium (NiCd) battery has a 10% higher than average run-time with an amp hour (Ah) rating that ranks in the top 40% of 18V-class drills. It has 0.2 Ah more capacity than the average 2.2 Ah battery in this class.
Charge
Time
60 min DeWalt Charger - Battery charge-time is about average for this class battery. If you only have one battery, or you go through multiple batteries on the job-site, charge-time is an important consideration.  
Fuel
Gauge
No Battery Fuel Gauge - Not equipped with a battery charge indicator that alerts you to remaining battery life or if the batteries are running low. Sudden battery failure during the job is a common frustration.  
Backup 2 Batteries Included - It's important to have a second back-up battery for the DeWalt DC725KA that's charged and ready to go. Makes it easy to swap-out batteries during the job with minimal down-time.


CONVENIENCE RATINGS
Weight 4.9 lbs Tool Plus Battery - It weighs about average and would be considered standard weight when compared to other 18V-class drills. The average cordless drill in this voltage class weighs about 4.7 lbs.  
Length 8-7/8 in - Cordless drill length is a personal preference, but shorter is generally better to help you in close quarters such as under a sink, or drilling in-between studs. Torque is harder to handle if the drill is too short though.  
Spindle
Lock
One-Hand Bit Change - This single-sleeve chuck has auto spindle lock. The drill bit can be changed with only one hand by simply spinning the chuck open to release the bit, and counter-spinning it to tighten.
LED
Light
Integrated LED Light - The DeWalt DC725KA illuminates your work area and allows you to clearly see your bit position and depth while you're drilling or driving. Great feature that's now available on many cordless drills.
Belt
Hook
No Belt Hook - There is no provision to hang the drill on your belt and free-up both hands to perform other tasks. You may be able to purchase a separate belt clip that can be attached to the drill.  
Side
Handle
No Side Handle - Side handles are a great safety feature and should be considered if you plan to drive at higher torque levels. They can help prevent injury by providing increased stability and control.  
Bubble
Level
No Bubble Level - This feature is only available on a few drills and can be helpful in situations where precision holes are critical for alignment. Most projects can be performed with just visual sighting.  
Keyless Keyless Chuck - Nearly all cordless drills are now equipped with keyless chucks that can be tightened with both hands (double-sleeve) or just one hand (single-sleeve) without the use of a key.
VSR VSR - Most cordless drills are equipped with variable speed capability that can be controlled with simple trigger pressure. Reverse is usually performed with the push of a side-to-side button.


Go to Cordless Drill Reviews from DeWalt DC725KA Review
Go to DeWalt Cordless Drill from DeWalt DC725KA Review





Disclosure | Disclaimer | Privacy
Copyright © 2009-2013 Cordless-Drill-Reviews.com. All Rights Reserved.