Black and Decker LDX220SBFC Review

Black and Decker LDX220SBFC

Black and Decker LDX220SBFC Black and Decker
LDX220SBFC

20V Max Lithium
Drill Driver
3/8" Chuck
Price Level: $
Torque

300

Max In-Lbs
Speed

1400

Max RPM
Weight

3.5

Lbs w Batt
Battery

1.5

Ah Capacity
Warranty

2

Year

Ratings Guide   Best Better Good FairPoor



KEY STRENGTHS & WEAKNESSES
POWER The LDX220SBFC is 36% less powerful than average and ranks in the bottom 20% of 18V-class drills for torque and power. It generates 168 in-lbs less maximum torque than the average 468 in-lbs drill in its class.  
SPEED This Black and Decker cordless drill is 12% slower than average and ranks in the bottom 40% of 18V-class drills for maximum RPM. It can only run at top speeds that are 184 RPM less than the average 1584 RPM drill in its class.  
WEIGHT It is 26% lighter than average and ranks in the top 20% of 18V-class drills for lower weight. It weighs 1.2 lbs less than the average 4.7 lb cordless drill in this class and should decrease operator fatigue.
BATTERY This Lithium Ion (Li-Ion) battery ranks about average for capacity and run-time with an amp-hour (Ah) rating that is considered standard for 18V-class batteries. The average battery capacity for this class is rated at 2.2 amp-hours.  
WARRANTY Black and Decker's 2-year limited tool warranty is about average for the cordless drill industry where the standard is 2-3 years. Longer warranties can often indicate improved durability with fewer repairs.  


Black and Decker LDX220SBFC Cordless Drill


PERFORMANCE RATINGS
Power 300 in-lbs - The LDX220SBFC is 36% less powerful than average and ranks in the bottom 20% of 18V-class drills for torque and power. It generates 168 in-lbs less maximum torque than the average 468 in-lbs drill in its class.  
Speed
Settings
2 Settings 0-450 / 0-1,400 RPM - Fitted with both Low and High speed settings that come standard on most cordless drills. Speed selection is an important feature to match drilling or driving RPM to each unique job.
Max
Speed
1400 RPM - This Black and Decker cordless drill is 12% slower than average and ranks in the bottom 40% of 18V-class drills for maximum RPM. It can only run at top speeds that are 184 RPM less than the average 1584 RPM drill in its class.  
Clutch 11 Settings - The Black and Decker LDX220SBFC has a below average number of clutch settings, but is probably still adequate for many DIY jobs. The clutch helps you to avoid stripping a screw with too much torque.  
Power
Ratio
86 P/W - The Black and Decker LDX220SBFC is designed with an average power-to-weight ratio that is standard for mid-range 18V-class cordless drills. The average P/W ratio is about 100 for cordless drills in this voltage class.  
Hammer This cordless drill is not equipped with a hammer function that can deliver several thousand impacts per minute. Hammer drill drivers are usually a little heavier and costlier, but they are effective on tougher jobs such as drilling into concrete.  


DURABILITY RATINGS
Gear
Case
Non-Metal Parts - Some of the Black and Decker LDX220SBFC transmission components are made of non-metal materials that are more susceptible to failure. Gears spin at high RPMs and experience large rotational forces.  
Chuck Plastic Sleeve - Chuck sleeves made of tough plastic materials save on weight, but they are more prone to cracking than metal sleeves. It generally won't withstand repeated drops onto hard surfaces.  
Motor No Brush Access - The entire drill usually has to be taken apart in order to access the motor brushes. Motor brushes wear-out and must be replaced periodically, but repair costs can sometimes be prohibitive.  
Warranty 2-Year - Black and Decker's 2-year limited tool warranty is about average for the cordless drill industry where the standard is 2-3 years. Longer warranties can often indicate improved durability with fewer repairs.  


BATTERY RATINGS
Type Lithium Ion (Li-Ion) LB20 - Newer technology rechargeable battery that provides higher capacity and longer run-time with less weight, but are more expensive than the older NiCd and NiMH batteries.
Capacity 1.5 Ah - This Lithium Ion (Li-Ion) battery ranks about average for capacity and run-time with an amp-hour (Ah) rating that is considered standard for 18V-class batteries. The average battery capacity for this class is rated at 2.2 amp-hours.  
Charge
Time
300 min Black and Decker Charger - Battery charge-time is longer than average for this class battery. If you are a serious DIYer or professional, it's important to have at least two batteries with one always charged for back-up.  
Fuel
Gauge
No Battery Fuel Gauge - Not equipped with a battery charge indicator that alerts you to remaining battery life or if the batteries are running low. Sudden battery failure during the job is a common frustration.  
Backup Only 1 Battery Included - Having just one battery can be frustrating if it runs out of power during the middle of a job. You may consider buying another battery for the Black and Decker LDX220SBFC.  


CONVENIENCE RATINGS
Weight 3.5 lbs Tool Plus Battery - It is 26% lighter than average and ranks in the top 20% of 18V-class drills for lower weight. It weighs 1.2 lbs less than the average 4.7 lb cordless drill in this class and should decrease operator fatigue.
Length 13 in - Cordless drill length is a personal preference, but shorter is generally better to help you in close quarters such as under a sink, or drilling in-between studs. Torque is harder to handle if the drill is too short though.  
Spindle
Lock
One-Hand Bit Change - This single-sleeve chuck has auto spindle lock. The drill bit can be changed with only one hand by simply spinning the chuck open to release the bit, and counter-spinning it to tighten.
LED
Light
Integrated LED Light - The Black and Decker LDX220SBFC illuminates your work area and allows you to clearly see your bit position and depth while you're drilling or driving. Great feature that's now available on many cordless drills.
Belt
Hook
No Belt Hook - Does not provide the capability to hang the drill on your belt and free-up both hands to perform other tasks. Laying the drill down is inconvenient and increases the risk of being dropped.  
Side
Handle
No Side Handle - Side handles are a great safety feature and should be considered if you plan to drive at higher torque levels. They can help prevent injury by providing increased stability and control.  
Bubble
Level
No Bubble Level - This feature is only available on a few drills and can be helpful in situations where precision holes are critical for alignment. Most projects can be performed with just visual sighting.  
Keyless Keyless Chuck - Nearly all cordless drills are now equipped with keyless chucks that can be tightened with both hands (double-sleeve) or just one hand (single-sleeve) without the use of a key.
VSR VSR - Most cordless drills are equipped with variable speed capability that can be controlled with simple trigger pressure. Reverse is usually performed with the push of a side-to-side button.


Go to Cordless Drill Reviews from Black and Decker LDX220SBFC Review
Go to Black and Decker Drill from Black and Decker LDX220SBFC Review





Disclosure | Disclaimer | Privacy
Copyright © 2009-2013 Cordless-Drill-Reviews.com. All Rights Reserved.